Your cart is empty

700E PRO DFC Super Combo Trex RH70E07AW

$1,578.99

 

 

 

700E PRO DFC Super Combo Trex RH70E07AW

700E PRO DFC Super Combo

700E PRO DFC Super Combo, the newest Align Helicopter, similiar with Align 700E Pro DFC Super Combo but with different motor and ESC.

700E PRO DFC Super Combo 2

700E PRO DFC Super Combo Features:

  • 1. Equipped with the low CG DFC rotor head, effectively reduce wind resistance during flight, providing the most direct and precise control feel back to the pilot, and exhibits exhilarating 3D performance and unimaginable flight speed.
  • 2.New style swash anti-rotation guide with embedded anti-wear material, effectively minimize the wear between swashplate long ball and guide.
  • 3.Equipped with brand new 700 3G carbonfiber main blades designed specifically for extreme 3D flights, featuring agility and stability, and new graphics paint scheme. The increased blade rigidity improves anti torsion characteristic during flight, and the new airfoil minimizes turbulence near the blade tip, reducing blade noise and power loss.
  • 4.Brand new tail blade designed to sustain optimal tail locking performance under high head speed and extreme flight conditions.
  • 5. Brand new CCPM direct servo linkage design to eliminate the weight of double push-pull linkage system, enabling faster and more precise control reaction.
  • 6. Integrated servo mounts on the main shaft bearing blocks, allowing cyclic servos to be mounted directly onto the bearing blocks, which together with the composite material frame plates, creating a clean and uncluttered look.
  • 7. Utilizes composite carbon material integration technique on frame structure for ease of maintenance and high rigidity. Increased front opening area to allow for simpler battery installation.
  • 8. Innovative sliding battery tray rails imbedded into the 3K side frames, with patented spring loaded latching mechanism, allowing for quick battery access as well as battery protection.
  • 9. Top mounted motor base bringing the motor's center of gravity closer to rotating disc, improving 3D agility and allowing blade drafts to cool the motor effectively .
  • 10. Motor mount consists of third bearing block to provide motor shaft support, effectively reduce torque induced shifts, and minimize gear striping issue.
  • 11. Utilizes high spec MOD1 CNC helical main gear and MOD 1 tail drive helical gear to increase gear mesh area, and minimize gear noise during flight.
  • 12. Top mounted ESC platform to take advantage of main blades airflow for effective cooling.
  • 13. New lightweight H-shaped electric device retention system for protection, as well as ergonomically correct design to simplify operation .
  • 14.800MX features high efficiency, superior power, excellent torque, low current draw and low temperature; it’s capable of maintaining consistent torque and head speed through continuous 3D maneuvers.
  • 15. Brand new gear box with more streamlined design also allows for simpler disassembly.
  • 16. High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.
  • 17. High torque rated one way bearing base.
  • 18. High precision bearing supported dual push point rudder control design.
  • 19. High speed rated thrust bearings incorporated into tail blade grips.
  • 20. Equipped with third bearing main shaft support to increase rigidity, meeting the needs of extreme 3D maneuvers.
  • 21. New lightweight landing gears.
  • 22.New style wrap around airbrushed fiberglass canopy, with aerodynamic form to reduce wind resistance. 4 point anti-vibration mounts for quick install and removal.
  • 23. New CNC aluminum alloy mounting plate.
Focus Shot1(New style wrap around airbrushed fiberglass canopy, with aerodynamic form to reduce wind resistance. 4 point anti-vibration mounts for quick install and removal.) Focus Shot2(The 700 DFC flybarless rotor head system utilizes extreme low CG design, effectively reduces resistance during flight, increased flight responsiveness and precision) Focus Shot3(800MX features high efficiency, superior power, excellent torque, low current draw and low temperature; it’s capable of maintaining consistent torque and head speed through continuous 3D maneuvers.)
700E PRO DFC Super Combo canopy
700E PRO DFC Super Combo Rotor Head
700E PRO DFC Super Combo Motor
Focus Shot4(Utilizes composite carbon material integration technique on frame structure for CCPM servos. Brand new CCPM direct servo linkage design) Focus Shot5(Utilizes composite carbon material integration technique on frame structure for CCPM servos. Brand new CCPM direct servo linkage design) Focus Shot6(Equipped with new high strength cnc m1 helical main gear and tail drive bevel gear assembly, featuring reinforced overall gear structure and increased gear thickness, effectively improves gear's anti torsion ability to prevent gear from deforming under extreme power,reducing gear wear and power loss.)
700E PRO DFC Super Combo Frame
700E PRO DFC Super Combo ccpm servo
700E PRO DFC Super tail drive

700E PRO DFC Super Combo Specification:

  • Length: 1350mm
  • Height: 360mm
  • Width: 208mm
  • Main Blade Length: 700mm
  • Main Rotor Diameter: 1582mm
  • Tail Rotor Diameter: 281mm
  • Motor Drive Gear:12T
  • Main Drive Gear:112T
  • Autorotation Tail Drive Gear: 104T
  • Tail Drive Gear: 22T
  • Drive Gear Ratio: 1:9.33:4.37
  • Weight(With Motor): 3310g
Focus Shot7(Equipped with brand new 700 3G carbonfiber main blades designed specifically for extreme 3D flights, featuring agility and stability, and new graphics paint scheme. The increased blade rigidity improves anti torsion characteristic during flight, and the new airfoil minimizes turbulence near the blade tip, reducing blade noise and power loss.) Focus Shot8(High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.) Focus Shot9(Brand new tail blade designed to sustain optimal tail locking performance under high head speed and extreme flight conditions.)
700E PRO DFC Super Main blades
700E PRO DFC Super new gearbox
700E PRO DFC Super new tail blade
Focus Shot10(800MX(520KV) high efficiency, high torque brushless motor) Focus Shot11(700 3G carbon main blades) Focus Shot12(105 Carbon Fiber Tail Blade)
700E PRO DFC Super Combo motor
700E PRO DFC Super combo Main blades
700E PRO DFC Super new tail blade

700E PRO DFC Super Combo:

  • T-REX 700E PRO DFC Kits Set x 1set
  • 3GX Flybarless system x 1
  • 700 3G Carbon Fiber Blades x 1set
  • DS615 digital servos x 3
  • DS655 Digital servo x 1
  • Aluminum Tail Boom x 1
  • 3K Carbon Fiber Tail Boom x 1
  • 800MX Brushless Motor(520KV) x 1
  • Castle EDGE HV 120 Brushless ESC x 1
  • 6A External BEC w/ 5.1V Two-way Step-down voltage regulator x 1
  • 105mm 3K Carbon Fiber Tail Blades x 1set
Focus Shot13(DS615 digital servos with CNC aluminum servo horns) Focus Shot14(DS655 Digital servo ) Focus Shot15(3GX Programmable Flybarless System )
700E PRO DFC Super Combo servo
700E PRO DFC Super combo digital servo
700E PRO DFC Super Combo 3GX flybarless system
Focus Shot16(Castle EDGE HV 120 Brushless ESC) Focus Shot17(6A External BEC w/ 5.1V Two-way Step-down voltage regulator )  
700E PRO DFC Super Combo ESC
700E PRO DFC Super Combo BEC

Radio transmitter and electronic equipment required for assembly:

  • Transmitter(7-channel or more, helicopter system)
  • Receiver(7-channel or more)
  • 6S Li-Po 4500 ~ 5200mAh x 2
  • 2S Li-Po 1900 ~ 2300mAh x 1
  • Dial Pitch Gauge

Add to Cart:

  • Manufactured by: Align



This product was added to our catalog on Monday 29 July, 2013.

walitefree