Your cart is empty

Align 250 Plus DFC BTF Trex RH25E03XW

$369.99  $339.99
Save: 8% off

 

 

 

Align 250 Plus DFC BTF Trex RH25E03XW

Align 250 Plus DFC

Align 250 Plus DFC, the newest Trex Helicopter, which utilizes DFC rotor head assembly, paired with 3GX MRS flybarless system optimized for T-REX 250 PLUS DFC flight characteristics. Without any adjustment or tuning, this combo will provide optimal stability suitable for pilots of all levels.

Align 250 Plus DFC 2

Align 250 Plus DFC Instructions:

  • The fully assembled helicopter can be flown immediately just by plugging in a charged battery, allowing the pilot to bypass assembly and adjustment process. T-REX 250 PLUS DFC complete package was assembled and tuned at the factory. Before you can fly, you need to simply bind the model with transmitter and either Futaba S-FHSS system / Spektrum DSM2/DSMX / JR DSM2 accordingly following the manual instruction.
  • For those enthusiasts who wish to fine tune 3GX MRS even further, it can be done through a few simple steps.
  • With the addition of the brand new 3GX MRS, the T-REX 250 PLUS DFC pushes past the performance limitation of flybar helicopter, improving both stability and 3D performance, while maintaining a down to earth price level.
Focus Shot 1(Extreme low CG and short main shaft design, dramaticallyreduces flight resistance) Focus Shot 2(Brand new 250DFC Metal Swashplate) Focus Shot 3(Brand new battery mount with integrated ESC mount)
Align 250 Plus DFC 3
Align 250 Plus DFC 4
Align 250 Plus DFC 5
Focus Shot 4(Main frame applied with new Insert-Modeling allow to fix servos into helicopter directly without nut washer) Focus Shot 5(New anti-rotation guide) Focus Shot 6(New style quick removable gyroscope mounting platform integrated with rudder servo mount)
Align 250 Plus DFC 7
Align 250 Plus DFC 8
Align 250 Plus DFC 9

Align 250 Plus DFC Features:

  • 1. T-REX 250 PLUS DFC BTF (Bind To Fly) complete package was assembled and tuned at the factory. Suitable for Futaba S-FHSS 2.4Ghz system/JR DSM2 and Spektrum DSM2/DSMX system transmitter to bind and fly.
  • 2. New style linkage rod design, complete assembly increases linkage rod rigidity, allowing the pitch slider (follower) to be omitted, resulting in a head assembly that is much simplified and rigid.
  • 3. Equipped with newly released 3GX MR flybarless system, with FHSS 2.4GHz buit in receive function, support Spektrum DSM2/DSMX or JR DSM2 satellite. For simpler and more direct setup, with setting optimized for T-Rex 250 Plus DFC, resulting in more stable and more preferable control feel than ever before.
  • 4. Designed specifically for DFC rotorhead system, improving DFC connecting rod's strength and minimizing linkage detachment during extreme flight maneuvers.
  • 5. Material integration technology used in frames, improving rigidity and simplifies maintenance.
  • 6. New style quick removable gyroscope mounting platform integrated with rudder servo mount, effectively utilizes frame’s inner space for simplified maintenance.
  • 7. New anti-rotation guide.
  • 8. Strengthen landing skids enhanced its durability.
  • 9. High efficiency shaft tail drive system, effectively increase rudder performance and decrease power loss.
  • 10. Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage.
  • 11. Single unit tail belt unit with the new counter weighted tail blade grips make it easier assembly and improving rudder efficiency.
  • 12. Utilizes dual point attachment design for zero play and higher precision control feel.
  • 13. Newly styled aerodynamically canopy for the ultimate fit.
Focus Shot 7(Utilizes dual point attachment design for zero play and higher precision control feel) Focus Shot 8(High efficiency shaft tail drive system, effectively increase rudder performance and decrease power loss) Focus Shot 9(RCM-BL250MX(3600KV) Brushless motor)
Align 250 Plus DFC 10
Align 250 Plus DFC 11
Align 250 Plus DFC 12
Focus Shot 10(3GX MRS Programmable Flybarless System) Focus Shot 11(DS415M Digital servo) Focus Shot 12(DS425M Digital servo)
Align 250 Plus DFC 13
Align 250 Plus DFC 14
Align 250 Plus DFC 15

Align 250 Plus DFC Specification:

  • Length:431mm
  • Height:150mm
  • Main Blade Length:205mm
  • Main Rotor Diameter:460mm
  • Tail Rotor Diameter:100mm
  • Motor Ponion Gear:15T
  • Main Drive Gear:120T
  • Tail Drive Gear:28T
  • Drive Gear Ratio:1:8:4.28
  • Weight(With Motor):250g

Align 250 Plus DFC Accessories:

  • T-REX 250 PRO Kit Set x 1 set
  • 205D Carbon Fiber Blades x 1 set
  • RCM-BL250MX(3600KV) Brushless motor x 1
  • 3GX MRS Programmable Flybarless System X 1set
  • DS425M Digital servo x 1
  • DS415M Digital servo x 3
  • RCE-BL15P Brushless ESC x 1 set
  • 37mm Tail Blade x 1 set

Focus Shot 13(RCE-BL15P Brushless ESC )

Align 250 Plus DFC 16

Align 250 Plus DFC


Radio transmitter and electronic equipment required for assembly:
1.ALIGN T6 of Futaba S-FHSS 2.4G Transmitter or JR/Spektrum 2.4GHz Transmitter(DSM2, DSMX)
2.Pitch gauge x 1
3.11.1V 3S Li-Po 850mAh battery x 1


Add to Cart:

  • Manufactured by: Align



This product was added to our catalog on Tuesday 04 June, 2013.

walitefree