Your cart is empty

Align 600 Pro DFC Trex Helicopter RH60E02XW Combo

$1,073.99

 

 

 

Align 600 Pro DFC Trex Helicopter RH60E02XW Combo

Align 600 Pro DFC Review:

Align 600 Pro DFC compare to  Trex 600E DFC the only difference is is not included 3GX Flybarless system.

Align 600 Pro DFC rh60e02xw

Align 600 Pro DFC rh60e02xw 1

Align 600 Pro DFC Specification:

  • Length: 1174mm
  • Height: 319mm
  • Width: 210mm
  • Main Blade Length: 600mm
  • Main Rotor Diameter: 1347mm
  • Tail Rotor Diameter: 260mm
  • Motor Drive Gear:13T
  • Main Drive Gear:112T
  • Autorotation Tail Drive Gear: 131T
  • Tail Drive Gear: 34T
  • Drive Gear Ratio: 1:8.61:3.85
  • Weight(With Motor): 2290g
Focus Shot1(Equipped with the low CG DFC rotor head, exhibits exhilarating 3D performance and unimaginable flight speed) Focus Shot2(Top mounted motor base and imbedded servo mounts ) Focus Shot3(New lightweight H-cross section for electronic equipments)

Align 600 Pro DFC rh60e02xw rotor head

Align 600 Pro DFC rh60e02xw motor base

Align 600 Pro DFC rh60e02xw H-cross section

Focus Shot4(Sliding battery tray rails imbedded into 3K Side frame) Focus Shot5(CNC slant thread main drive gear set) Focus Shot6(CNC machined aluminum pieces including servo mount)

Align 600 Pro DFC rh60e02xw  3K Side frame

Align 600 Pro DFC rh60e02xw drive gear set

Align 600 Pro DFC rh60e02xw CNC machined aluminum pieces

Align 600 Pro DFC Features:
1.Equipped with the low CG DFC rotor head, effectively reduce wind resistance during flight, providing the most direct and precise control feel back to the pilot, and exhibits exhilarating 3D performance and unimaginable flight speed.
2.The frame utilizes 2mm carbon fiber plates of the highest spec. Patented composite material construction technique cleverly utilize frame space that improved overall rigidity, and also created a minimalistic beauty.
3.Innovative sliding battery tray rails imbedded into the 3K side frames, with patented spring loaded latching mechanism, allowing for quick battery access as well as battery protection.
4.Heatsink embedded into motor mount for effective cooling of motor.
5.Top mounted motor base bringing the motor’s center of gravity closer to rotating disc, improving 3D agility.
6.Utilize direct link CCPM swashplate control system to enable direct and fast control response. Specially designed anodized CNC servo horns are not only visually pleasing, but are extremely rigid.
7.Utilizes highest spec CNC modue-1 helical main gear, with highest load tolerance and lowest noise.
8.The most optimal motor pinion ratio and tail gear ratio to achieve the most efficient power output and flight characteristic.
9.High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to improve rudder lockingand control effectiveness.
10.Additional radial bearing is added to the one way bearing block to ensure smooth rotation, and eliminate jammed one way bearing.
11.Brand new 600 class 12S high voltage brushless motor providing generous torque and power output, yet consumes lower average current to prolong the life of batteries
12.Motor mount consists of third bearing block to provide motor shaft support, effectively reduce torque induced shifts, and minimize gear striping issue.
13.High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.
14.Brand new CNC machined metal tail gear box, with thicker side plates to increase rigidity. The more streamlined design also allows for simpler disassembly.
15.Total pitch range of  plus 15 to 15 degrees, for the ultimate 3D explosive power.
16.Tail pitch mechanism equipped with high precision bearing.
17.High speed thrust bearings in tail blade grips.
18.New lightened landing gear assembly with lower center of gravity.
19.High quality painted fiberglass canopy with 4-point quick release mounts.

Focus Shot7(Rudder servo mount imbedded into 3K Side frame) Focus Shot8(New carbon tail control pushrod assembly) Focus Shot9(.New tail control assembly with dual mounting points, effectively eliminate slop and improve control precision and feel)

Align 600 Pro DFC rh60e02xw Rudder servo

Align 600 Pro DFC rh60e02xw tail control pushrod assembly

Align 600 Pro DFC rh60e02xw New tail control assembly

Focus Shot10(600MX 510KV Brushless Motor) Focus Shot11(600 3G Carbon fiber blades) Focus Shot12(DS610 standard servo)

Align 600 Pro DFC rh60e02xw motor

Align 600 Pro DFC rh60e02xw Carbon fiber blades

Align 600 Pro DFC rh60e02xw Servo

Align 600 Pro DFC Package Includes:

  • T-REX 600E PRO DFC Kits Set X1
  • 600 3G Carbon fiber blades X1
  • 600MX Brushless Motor(510KV) X1
  • DS615 Standard servo X3
  • DS655 Specialized servo X1
  • Castle ICE2 HV 80 Brushless ESC X1
  • 6A External BEC w/ 5.1V Two-way Step-down voltage regulator X1

 

Focus Shot13(DS655 servo) Focus Shot14(Castle ICE2 HV 80 Brushless ESC) Focus Shot15(3GX Flybarless System)

Align 600 Pro DFC rh60e02xw Servo

Align 600 Pro DFC rh60e02xw Brushless ESC

Align 600 Pro DFC rh60e02xw 3GX Flybarless System


Radio transmitter and electronic equipment required for assembly:

  • Transmitter(7-channel or more, helicopter system)
  • Receiver(7-channel or more)
  • 6S Li-Po 2600 ~ 4600mAh X2 (3300mAh suggestion)
  • Dial Pitch Gauge or Digital Pitch Gauge
  • 3GX Flybarless System X1

Align 600 Pro DFC rh60e02xw 1


Add to Cart:

  • Manufactured by: Align



This product was added to our catalog on Wednesday 07 November, 2012.

walitefree