Align trex APS gyro HEGAPS01 rc gyro

Align trex APS gyro HEGAPS01 rc gyro

Features:

• Align APS has build in 3-axis accelerometer, 3-axis magnetic compass, altimeter, and GPS sensor to work with DSP processor to enable APS to have precise detection and control abilities.
• For use with Align's 3GX flybarless system for ease of install and simplified setup, APS is functional with a few setup steps.
• Multi flight mode and multi navigate functions. Which is the system with most modes and functions in the current market.
• Failsafe function, When helicopter lose RC signal, APS will take over and fly the helicopter back to where the helicopter regains RC signal.
• Automatically helicopter stabilize function. When helicopter's attitude is not stable, switch to APS Mode will enable APS to immediately stabilize helicopter and provide a big help for the beginners.
• Supports Spektrum/JR satellite receivers and Futaba S.BUS architecture.
• Supports software upgrades.

Specification:

• Suitable Voltage Range:DC 3.5~8.4V
• Operating current consumption:<200mA @4.8V
• Operating temperatur:-20 degree ~65 degree
• Operating humidity:0%~95%
• RoHS certified
• Hovering Precision (Depending on satellite status):

              Horizontal more or equal 1m

              Vertical more or equal 1m

• APS Cotrol unit Dimension/Weight:

              35.4x27.9x17mm / 14.8g

• APS Sensor Dlmension/Weight

             29.5x26.3x10.8mm / 12.7g

Accessories:

• APS Control Unit * 1
• APS Sensor * 1
• APS gyro anti-vibration foam * 6(34x9x3mm)
• APS sensor mount * 1(34.5x30x6mm)
• APS sensor mounting platform tailboom clamp (550-700) * 1
• APS sensor mounting platform tailboom clamp (500) * 1
• APS sensor mounting platform tailboom clamp (450) * 1
• APS controller vibration dampening metal plate * 1(35.4x27.9x3mm)
• Signal Y-adapter * 1
• APS Signal wire * 1(350mm)
• GPS Signal wire * 1(160mm)
• Self tapping screw * 2(T2x10mm)
• Self tapping screw * 2(T2.6x10mm)
• Self tapping screw * 2(T3x12mm)
• Gyro foam * 1 (3M 24x24x2mm)
• Plastic flat screwdriver * 1(Dia3xDia7x40mm)