Remote Control Blog

Install Tarot T-2D Gimbal On DJI Phantom II

It’s actually not a very difficult job to install the tarot t-2d gimbal to phantom, take the following steps and you will make it:
1 Find two studs or aluminum cylinder which has srew on one side, hole on the other side,the screw is 3.0mm.
tarot t-2d
2. Get 2 scews like the one bellow, and make it this way with glues, screw them into the bottom of phantom.
tarot t-2d gimbal
3. Drill 2 holes on the carbon board in the tarot gimbal package, the shape like in the picture will be perfect.
tarot t-2d gimbal
4. Lock the gimbal to it and fasten the screw in the front, now it’s strong and steady, and you just need to loose the screw when you want to diassemble it.
tarot t-2d gimbal install
5. Now it’s all done, a picture of finished job:)

tarot t-2d gimbal finished


October 24, 2013 This post was written by Categories: Aerial Photography Tagged with:
Comments are off for this post