OOmodel RC Forums

C jets, whether gas turbine or electric ducted fan (EDF) powered, can provide the ultimate radio control flying experience if you're looking to fly faster model aircraft.

remote-control jets have never performed particularly well.

Their engines are less efficient than exposed propellers at an R/C plane’s speed, which makes the toys sluggish and difficult to steer, leading to crashes. To compensate for the lack of power, engineers at toy manufacturer Great Planes reduced the weight ...

Key Points:
Overview
Trainers and acrobats
Price
Some popular starter planes
Stuff Needed
Whats the 2 channel 3 channel mean?
How much room do you need?
Will The Plane Fly away from you?
Some Final Tips

An Overview of what RC Model Airplanes as a Hobby is all about

Remote Control airplanes have one basic main tenet. They are planes that you can fly by using some kind of a hand-held controller or transmitter. That ...

Flying remote control (RC) airplanes affords those interested in aviation the opportunity to get a taste for flying without leaving the ground. There are planes for beginners and advanced fliers looking to learn new skills.

Trainer Airplanes

For individuals just getting started, trainer airplanes are the first step. These planes have a basic design and come in a variety of shapes and sizes. Trainers make up the largest segment of RC airplanes, and come with ...

The world of RC Airplanes use to be out of reach for the Average person. They would have to go and get plans balsa wood glue and spend a good few months or years building a model. All the models had engines which meant messing with fuel and oil which made flight preparation time consuming and messy.

Now days thanks to miracle of Epp foam and modern battery technology you can be up and flying ...

Sure, making a model of an F-22 is fun, but as James Dicky once said "Flight is the only truly new sensation than men have achieved in modern history." So, once you finish that wood model, it is time to make one take to the sky!

Steps

The Material

1
Choose your material. There are many things you can make a plane out of, but it must have two properties: lightness and stability. There aren't ...

A lot of free space. e.g. a big field. Don't fly in parks where other people are until you are a sufficient flyer. You could seriously injure somebody.
A good friend or assistant to start the plane and help you in dangerous situations.
A remote control plane - check if everything is o.k. before every flight. Electric models are available as well as the traditional gas models.
A transmitter - make sure the batteries are ...

Go easy on the sticks. When your just learning how to fly, never push a control stick (except for the throttle) too far in one direction, especially in emergencies. Just keep calm, and get yourself out of the situation. Again, try a flight simulation.
Fly into the wind for optimal performance.
Find an instructor, experienced flyer, or consider joining a flying club. Crashing on your first flight isn't a good way to start your flying ...

Flying a radio controlled plane can be tricky. These steps will help you figure out the basics of RC flying.

1
Buy a remote control plane. A good beginner's plane would be the super cub from HobbyZone, for about $50-100. However, it is recommended to not use the Anti Crash Technology.

2
Build the plane (if assembly is required). Or rebuild it after you crashed it while trying to fly it without learning on a ...

Electric power for RC aircraft: planes, helicopters, ducted fan jets; is the fastest growing aspect of this hobby/sport. There are lots of reasons for this, but perhaps two major developments have created this gold-rush atmosphere. First, the recent bringing to market of the Lithium Polymer battery – a refinement of the lithium-ion battery. Second, the disappearance of many of the traditional local RC flying sites under the pressure of real-estate development and population growth.

The ...

After the successful flight of the man-carrying vehicle made by the Wright brothers, interest in aviation spread rapidly and many models were made. Model airplane enthusiasts are already existing in the early 1900s'. Most of the models are rubber powered, twining type with double stick fuselages that are common in Europe. But even in the early days of model flying, small petrol and compressed air engines are already being used. The materials used in model ...