Your cart is empty

Tarot 5.8G FPV image transmission transceiver kit TL300N-US Ship

$55.99

Always Free Shipping

 

 

 

This item is located in the US, buyers from the US can get it in a few days!

Tarot 5.8G FPV image transmission transceiver kit TL300N

 

Product Description:
      TAROT developed 32 frequency points! 600mw 5.8g image transmission system with super mini size and light weight, especially for current small-scale multi-axis aircraft as well as the space shuttle. 32 frequency points is compatible with conventional frequency to provide one-way video signal, two-way audio signals long-distance transmission, bedides, it also  provides 5V1A power output (can be used for image overlay, video cameras power supply. Be sure to check the voltage and current ahead in order to avoid burn-related equipment), its transmitter weight is only  8.3g (excluding antenna).

transceiver kit

 image transmission transceiver kit

5.8G FPV image transmission transceiver kit

5.8G FPV image transmission

channel list

transmitter and receiver

Product Specifications:

  • TX5832-600M audio and video transmitter × 1
  • RX5832 audio and video receiver × 1
  • 7P color strip cable × 1
  • 3.5MM power cord × 1
  • 2.5MM audio and video cable × 1
  • Manual × 1

Transmitter Specifications:

  • Weight: 8.3G (without antenna)

  • Dimension: 21 x 33 x 7.5 mm

  • Working Frequency: 5645-5945MHz

  • Channel: 4 bands / 32 channel

  • Channel selection:5-DIP switch

  • Output Power: 27.5 dbm (600mw)

  • Input Voltage: DC 7-26V (2-6S)

  • Output Voltage: 5V 1A

  • Antenna Adaptor: SMA 50Ω

  • Working Temperature: -10 ~ 60 degrees.

  • Frequency: FM

Receiver Specifications:

  • Weight: 10.9 G (without antenna)
  • Dimension: 28 x 46 x 40 mm
  • Working frequency: 5645-5945 MHZ
  • Channel: 4 bands / 32 channels
  • Channel selection:5-DIP switch
  • Receiving Sensitivity: -85 dbm
  • Input Voltage: DC 7-26V (2-6S)
  • Antenna Adaptor: SMA 50Ω
  • Working Temperature: -10 ~ 60 degrees
  • Frequency: FM/PLL
  • Output: 2.5mm 4 pins AV output
  • Power input: 3.5mm (exterior) 1.3 mm (interior) DC

Note:

  1. Install the antenna before connecting the power to avoid further damage.
  2. Choose proper working frequency and tune the receiver to the same frequency. Please refer to the channel list.
  3. Do not touch the surface of transmitter while operating. It is normal the surface is getting hot.
  4. The input voltage range is between 7-26V (2-6S), do not overload the working voltage.
  5. The output voltage is 5V1A. Please confirm the current and voltage of the camera.

Add to Cart:

  • Manufactured by: Tarot



This product was added to our catalog on Thursday 10 September, 2015.

walitefree