Your cart is empty

Trex 550E PRO DFC Super Combo Align RH55E06XW w/ 3GX FBL System

$1,089.99

 

 

 

Trex 550E PRO DFC Super Combo Align RH55E06XW w/ 3GX FBL System

Trex 550E PRO DFC heli

Trex 550E Pro DFC is Brand new T-Rex 550E PRO DFC incorporates all new design elements, focusing specifically on upgrading the power with a 700 class motor, the 730MX (850KV). With a size that fall in-between large and small models, this brand new T-REX 550E PRO DFC features stability and agility, with superior power output that will guaranteed jaw dropping performance. This Combo is with 3GX Flybarless System versus to Trex RH55E07XW.

Trex 550E PRO DFC dimension

Trex 550E Pro DFC Introduction:

  • T-REX 550E PRO DFC is equipped with latest designs such as: DFC main rotor system, new 112T CNC helical main gear, new style tail drive assembly, new style tail control system, etc. The most talked about feature is the newly developed 730MX (850KV) motor, a motor normally found in 700 class helicopter but over spec for 550 class. Enthusiasts can clearly feel the dramatic increase in power and torque, while taking advantage of its higher efficiency, lower current and temperature benefits. In addition, the newly designed 2mm thick 3K carbon side plates not only enables the installation of wider 730MX (850kv) motor, they also simplify the structure, while maintaining high rigidity and easy maintenance.
  • The clean atheistic exterior, ergonomic design, and superior control feel; all are reasons for enthusiasts not to miss this value packed T-REX 550E PRO DFC!
Equipped with the low CG DFC rotor head, exhibits exhilarating 3D performance and unimaginable flight speed. New DFC CCPM Swashplate and new metal body mount to increase body rigidity and added gyro placement location.
Trex 550E PRO DFC rotor head Trex 550E PRO DFC swashplate
New 2mm 3K carbon fiber side frame for simple yet rigid frame construction, not only for easy assembly and maintenance, but also allowing capable of 730MX(850KV) motor to increase fight power. Integrated swash anti-rotation guide and gyro mounting platform.
Trex 550E PRO DFC side frame Trex 550E PRO DFC anti rotatin guide
Equipped with new high strength cnc m1 helical main gear and tail drive bevel gear assembly, featuring reinforced overall gear structure and increased gear thickness, effectively improves gear's anti torsion ability to prevent gear from deforming under extreme power, reducing gear wear and power loss. Power upgrade to 730MX(850KV) motor, the feel as If a turbo charger was added to the helicopter, capable of high efficiency, low current and low temperature, with dramatic 700 class flight performance in 550 class helicopter.
Trex 550E PRO DFC helical main gear Trex 550E PRO DFC 730mx motor

Trex 550E Pro DFC Specification:

  • Length: 1160mm
  • Height: 330mm
  • Width: 110mm
  • Main Blade Lenght: 550mm
  • Main Rotor Diameter: 1248mm
  • Tail Rotor Diameter: 254mm
  • Motor Drive Gear: 16T
  • Main Drive Gear: 112T
  • Autorotation Tail Drive Gear: 131T
  • Tail Drive Gear: 34T
  • Drive Gear Ratio: 1:7:3.85
  • Weight(w/o power system): 2400g

Standard Equipment:

  • Castle Talon 90 Brushless ESC * 1
  • 730MX Brushless Motor (850KV) * 1
  • DS615 Digital Servo * 3
  • DS655 Digital Servo * 1
  • 3GX Flybarless System * 1

Trex 550E PRO DFC standard equipment

Trex 550E Pro DFC Accessories:

  • T-REX 550E PRO DFC Kits Set x 1 set
  • 550 3G Carbon Fiber Blades x 1 set
  • 90mm Carbon Fiber Tail Blade x 1 set
  • 730MX Brushless Motor(850KV) x 1
  • DS615 Digital servo x 3
  • DS655 Digital servo x 1
  • Castle Talon 90 Brushless ESC x 1
  • 3GX Flybarless System X1 set
Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage. Rear mounted rudder servo mount & carbon fiber gyro mount.
Trex 550E PRO DFC torque tube drive gear Trex 550E PRO DFC rudder servo mount
Equipped T-REX 600 class tail boom set, supporting with 600mm main blade and increase tail stability. Brand new tail blade designed to sustain optimal tail locking performance under high head speed and extreme flight conditions.
Trex 550E PRO DFC tail boom Trex 550E PRO DFC tail blade
High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.  
Trex 550E PRO DFC new tail gearbox  

3GX Programmable Flybarless System Specification:

  • Operating voltage range:DC 3.5V~8.4V
  • Operating current consumption:less than 80mA  at 4.8V
  • X and Y axis Operating Angle Range: minus 300~plus 300 degree
  • Z axis Operating Angle Range: minus 600~ plus 600 degree
  • Sensor resolution:12bit
  • Supports 90/120/135/140 CCPM swashplates
  • Spektrum and JR Satellite antennas support (Replaces original factory receiver)
  • Futaba S.BUS system support
  • Supports Wide/Narrow Bandwidth Digital and brushless servos
  • Compatible with 2 to 5 blades rotor heads
  • Built in governor function
  • Maximum working voltage:8.5V
  • Compatible with 1024/2048 resolution Spektrum receivers
  • Field setup without the use of a PC
  • Support up to 6 servos
  • Automatic servo type recognization
  • Operating Temperature: minus 20~60 degree
  • Operating Humidity:0%~95%
  • Size:36.5x25.2x15.6 mm Size
  • Weight:11g

Trex 550E PRO DFC 3GX flybarless system

Radio transmitter and electronic equipment required for assembly:

  • 1.Transmitter(6-channel or more,helicopter system)
  • 2.Receiver(6-channel or more)
  • 3.Pitch gauge or Digital Pitch Gauge
  • 4.6S Li-Po 1100~1400mAh battery x 1

Add to Cart:

  • Manufactured by: Align



This product was added to our catalog on Sunday 08 September, 2013.

walitefree