Your cart is empty

Trex 550L Dominator Super Combo Align RH55E09XW

$1,199.99  $1,099.99
Save: 8% off

 

 

 

Trex 550L Dominator Super Combo Align RH55E09XW

Trex 550L Dominator, equipped with 730MX 850KV motor with unique DOMINATOR painting scheme and extremely efficient and powerful output,  You may need Trex 700L Dominator Super Comb.

Trex 550L Dominator

Trex 550L Dominator Introduction:

  • With a size that fall in-between large and small models, T-REX 550 features stability and agility which is the most popular model for pilots in all classes to practice. Now T-REX 550L Dominator inherit with all outstanding design concepts and much superior power supply that will guaranteed jaw dropping performance.
  • T-REX 550L firstly utilizes composite material integration technology on carbon side frame plates, also adding battery mounting rails and top mounted motor base design make assembly easy and protectable. Designed with direct servo CCPM control, and a single piece main bearing block with integrated servo mounts; plus equipped with the low CG DFC rotor head, exhibits exhilarating 3D performance and unimaginable flight speed. High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.
  • T-REX 550L Dominator equipped with 730MX 850KV motor with unique DOMINATOR painting scheme and extremely efficient and powerful output; brand new high voltage brushless BL815H/BL855H servos features with high torque and super efficiency reaction and higher precision; also keep extremely low temperature after flight not only can extend the service life but also be the favorite ones for all our factory pilots.
  • The most important upgrade should be Gpro flybarless system, all the up-to-date devices are all included, must be your best choice to try on, just don’t miss it and get a T-REX 550L Dominator right now.

Trex 550L Dominator top view

Trex 550L Dominator Features:

Equipped with the low CG DFC rotor head, exhibits exhilarating 3D performance and unimaginable flight speed. Designed with direct servo CCPM control, and a single piece main bearing block with integrated servo mounts similar to that of T-Rex 700E DFC, for simplified servo installation and clean aesthetic.

Trex 550L Dominator top view

Trex 550L Dominator side view

ALIGN new multifunctional Gpro flybarless system with active CPU, processing 20 times faster than previous generation. The freshly new software structure improves system compensation, bring Gpro up with precise and agile response, and also keep up-to-date flying performance than ever. New style swash anti-rotation guide with embedded anti-wear material, effectively minimize the wear between swashplate long ball and guide.

Trex 550L Dominator 3

Trex 550L Dominator 5

Innovative sliding battery tray rails imbedded into the 3K side frames, with patented spring loaded latching mechanism, allowing for quick battery access as well as battery protection. Carbon side frame plates utilized composite material integration technology, adding battery mounting rails.The clever use of open spaces within the frame resulting in a structure that is both rigid and aesthetically pleasing.

Trex 550L Dominator 6

Trex 550L Dominator 7

High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision. Utilizes newly designed vertical tail fin, creating a brand new look for T-Rex 550L.

Trex 550L Dominator 8

Trex 550L Dominator 9

Trex 550L Dominator Standard equipment:

  • Castle Talon 90 Brushless ESC x 1
  • 730MX Brushless Motor(850KV) x 1
  • BL815H High Voltage Brushless servo x 3
  • BL855H High Voltage Brushless servo x 1
  • Gpro Flybarless System x 1

Trex 550L Dominator 19

Trex 550L Dominator Specification:

  • Length: 1070mm
  • Height: 337mm
  • Width: 210mm
  • Main Blade Lenght: 550mm
  • Main Rotor Diameter: 1248mm
  • Tail Rotor Diameter: 254mm
  • Motor Drive Gear: 16T
  • Main Drive Gear: 112T
  • Autorotation Tail Drive Gear: 131T
  • Tail Drive Gear: 34T
  • Drive Gear Ratio: 1:7:3.85
  • Weight(w/o power system): 2790g

Trex 550L Dominator 20

Trex 550L Dominator Accessories:

  • Trex 550L DOMINATOR Kits Set x 1 set

Gpro Programmable Flybarless System Features:

  • Operating voltage range:DC 3.5V~8.4V
  • Operating current consumption:less than 80mA  at 4.8V
  • X and Y axis Operating Angle Range: minus 300~ plus 300 degree
  • Z axis Operating Angle Range: plus 600~ plus 600 degree
  • Sensor resolution:12bit
  • Supports 90/120/135/140 CCPM swashplates
  • Spektrum and JR Satellite receivers support (Replaces original factory receiver)
  • Futaba S.BUS/JR X.BUS system support
  • Supports Wide/Narrow Bandwidth Digital and brushless servos
  • Compatible with 2 to 5 blades rotor heads
  • Built in governor function
  • Maximum working voltage:8.5V
  • Compatible with 1024/2048 resolution Spektrum receivers
  • Field setup without the use of a PC
  • Support up to 6 servos
  • Automatic servo type recognization
  • Operating Temperature:-20~60 degree
  • Operating Humidity:0%~95%
  • Size:36.5x25.2x15.6 mm Size
  • Weight:11g

Trex 550L Dominator
Radio transmitter and electronic equipment required for assembly:

  • 1.Transmitter(6-channel or more,helicopter system)
  • 2.Receiver(6-channel or more)
  • 3.Pitch gauge or Digital Pitch Gauge
  • 4.6S Li-Po 2600~5200mAh battery x 1

Add to Cart:

  • Manufactured by: Align



This product was added to our catalog on Sunday 27 July, 2014.

walitefree