Your cart is empty

Trex 600 Nitro DFC Super Combo Align RH60N01XW





Trex 600 Nitro DFC Super Combo Align RH60N01XW with 3GX Flybarless System 

After Align TREX 600 Nitro V2, there comes Trex 600 Nitro DFC, the newest Align Helicopter, will be available soon.smiley

Trex 600 Nitro DFC 1

Trex 600 Nitro DFC Features:

  • Equipped with DFC flybarless head assembly, with extremely low CG design to minimize wind resistance, providing more direct and precise flight control response and higher top speed.
  • Dual 3K carbon plate side frame design for ease of maintenance and resistance to torque induced flex.
  • Additional radial bearing is added to the top of the main gear hub to ensure stable rotation, and eliminate jamming of one way bearing.
  • Newly designed unibody stainless steel tail drive gear center mount, for more precise tail drive gear and higher tolerance.
  • New high quality carbon rudder control rod assembly using 5mm carbon rod and metal connectors, resulting in improved rudder control precision.
  • Brand new torque tube front and rear drive gear set, use utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability. Effectively minimize gear striping and crash damage.
  • High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.
  • Utilizes high efficient tail drive system.
  • High speed rated thrust bearing in tail blade grips.
  • High efficiency tail shaft drive design.
  • Highly efficient lightened engine cooling fan, reducing engine load and improving cooling efficiency.
  • Large diameter clutch system with unique installation method for good balance, minimal vibration, and effective power transfer.
  • Forward mounted rudder servo to protect it from exhaust contamination.
  • 95mm tail blades for sharp rudder response and excellent tail locking ability.
  • Unique H cross section shaped electronic mounting platform for easy electronic mounting and protection.
  • Large capacity 440CC fuel tank for up to 10 minutes of extreme 3D flights.
  • Starting and clutch supporting point utilizes 10mm one way bearing.
  • All up ready to fly dry weight is only 3200g (7lbs).
  • Main fuel tank designed with fuel supply stabilization effect.
  • Impact resistant fiberglass canopy with 3 point hook mounting system for ease of install/removal.
  • Designed with concepts from large helicopter competitions, for the best static and dynamic flight performance.


Focus Shot1(Equipped with the low CG DFC rotor head, exhibits exhilarating 3D performance and unimaginable flight speed) Focus Shot2(600DFC CCPM Metal Swashplate.) Focus Shot3(New lightweight H-cross section for electronic equipments.)
Trex 600 Nitro DFC rotor head
Trex 600 Nitro DFC Metal Swashplate
Trex 600 Nitro DFC H-cross section
Focus Shot4(New elevator arm set, high rigidity metal main shaft bearing block.) Focus Shot5(Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear.) Focus Shot6(Metal stabilizer set)
Trex 600 Nitro DFC 4
Trex 600 Nitro DFC 5
Trex 600 Nitro DFC 6

Users must have a certain concept of security to operate the R/C helicopters.
Be sure to read and comply with related safety notes of instruction manual before flying.  

Trex 600 Nitro DFC Specification :

  • Length: 1160mm
  • Height: 357mm
  • Main Blade Length: 600mm
  • Main Rotor Diameter: 1350mm
  • Tail Rotor Diameter: 240mm
  • Engine Pinion Gear: 20T
  • Main Drive Gear:170T
  • Autorotation Tail Drive Gear: 180T
  • Drive Gear Ratio: 8.5:1:4.5(E:M:T)
  • Fuel Tank Capacity:440cc
  • Flying Weight Approx: 3200g
Focus Shot7(Brand new carbon tail control pushrod assembly) Focus Shot8(High efficiency shaft tail drive system ) Focus Shot9( New tail control assembly with dual mounting points, effectively eliminate slop and improve control precision and fee.)
Trex 600 Nitro DFC 7
Trex 600 Nitro DFC 8
Trex 600 Nitro DFC 9
Focus Shot10(Governor Sensor) Focus Shot11(600 3G Carbon fiber blades) Focus Shot12(DS655 Digital Servo)
Trex 600 Nitro DFC 10
Trex 600 Nitro DFC 11
Trex 600 Nitro DFC 12

Trex 600 Nitro DFC Accessories

  • T-REX 600N DFC Kits Set x 1
  • 600 3G Carbon Fiber Blades x 1set
  • 3GX Flybarless system x 1
  • Ds615 Standard servo x 3
  • Ds655 Specialized servo x 1
  • Govemor Sensor x 1
  • B6T 2 In 1 Voltage Regulator x 1
ocus Shot13(DS615 Digital Servo with CNC aluminum servo horns) Focus Shot14(3GX Programmable Flybarless System) Focus Shot15( B6T 2 In 1 Voltage Regulator)
Trex 600 Nitro DFC 13
Trex 600 Nitro DFC 14
Trex 600 Nitro DFC Voltage Regulator

Radio transmitter and electronic equipment required for assembly:

  • Transmitter(7-channel or more, helicopter system)
  • Receiver(7-channel or more)
  • Standard servo X1 ( for throttle)
  • Engine starter X1
  • Digital pitch gauge X1
  • Fuel pump X1
  • Engine fuel X1
  • 50Muffler X1
  • Align 50H Engine or 55HP Engine X1

Trex 600 Nitro DFC 2

Add to Cart:

  • Manufactured by: Align

This product was added to our catalog on Monday 18 February, 2013.