Your cart is empty

Trex 600E Pro DFC Combo Helicopter Align RH60E02AW

$1,073.99

 

 

 

Trex 600E Pro DFC Combo Helicopter Align RH60E02AW 

Trex 600E Pro DFC, the brand new T-Rex 600E PRO DFC, is the result of ingenious engineering inspired by the art of modern industrial design. Matched with 3GX flybarless system, the new generation Trex 600E PRO DFC is a show of perfection. We have Align 600 Pro DFC for your comparison.

Trex 600E Pro DFC

Trex 600E Pro DFC Introduction:

  • Equipped with the low CG DFC rotor head, effectively reduce wind resistance during flight, providing the most direct and precise control feel back to the pilot; highest spec 2mm thick carbon fiber plate with patented plastic integration techniques not only strengthen the structure, but also create a neat and clean look; Unique battery latch assembly for stronger mount and easier battery replacement.
  • A power upgrade system designed specifically to bump up the power output of T-Rex 600E Pro by 30% by upgrading the motor from 600MX motor (3300w/5500w) to 750MX/530KV motor (4400w/7260w). The feel as if a turbo charger was added to the helicopter, with dramatic increase of motor torque output, and near bulletproof governing speed of the rotor, while maintaining power consistency throughout the entire flight duration. In addition, the brand new spindle shaft design features enlarged diameter from 6mm to 8mm, with oversized M5x10mm spindle screws to increase the rigidity of the overall rotor head.
  • The unbelievable flying performance and control feel of the T-Rex 600E PRO DFC, along with 750MX(530KV) motor, makes this helicopter the creme of crop amongst all competitors.

Trex 600E Pro DFC Features:

Equipped with the low CG DFC rotor head, effectively reduce wind resistance during flight, providing the most direct and precise control feel back to the pilot, and exhibits exhilarating 3D performance and unimaginable flight speed. The brand new spindle shaft design features enlarged diameter from 6mm to 8mm, with oversized M5x10mm spindle screws to increase the rigidity of the overall rotor head. Brand new 600E PRO Performance Booster designed specifically to bump up the power output of T-Rex 600E PRO by 30% by upgrading the motor from 600MX motor (3300w/5500w) to 750MX/530KV motor (4400w/7260w). The feel as if a turbo charger was added to the helicopter, with dramatic increase of motor torque output, and near bulletproof governing speed of the rotor, while maintaining power consistency throughout the entire flight duration.
Trex 600E Pro DFC Rotor Head Trex 600E Pro DFC Motor
Top mounted motor base and imbedded servo mounts. New lightweight H-cross section for electronic equipments.
Trex 600E Pro DFC Servo Mount Trex 600E Pro DFC H-cross section
Sliding battery tray rails imbedded into 3K Side frame. Equipped with new high strength CNC M1/118T helical main gear and tail drive bevel gear assembly, featuring reinforced overall gear structure and increased gear thickness, effectively improves gear's anti torsion ability to prevent gear from deforming under extreme power, reducing gear wear and power loss.
Trex 600E Pro DFC Sliding Battery Tray Trex 600E Pro DFC Main Gear

Trex 600E Pro DFC 3

CNC machined aluminum pieces including servo mount. Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage.
Trex 600E Pro DFC Aluminum pieces Trex 600E Pro DFC top view
Rudder servo mount imbedded into 3K Side frame. New carbon tail control pushrod assembly.
Trex 600E Pro DFC rudder servo mount Trex 600E Pro DFC tail control
New tail control assembly with dual mounting points, effectively eliminate slop and improve control precision and feel. Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage.
Trex 600E Pro DFCnew tail control Trex 600E Pro DFC side view

Trex 600E Pro DFC Specification:

  •  Length: 1160mm
  • Height: 319mm
  • Width: 210mm
  • Main Blade Length: 600mm
  • Main Rotor Diameter: 1347mm
  • Tail Rotor Diameter: 260mm
  • Motor Pinion Gear: 14T
  • Main Drive Gear: 118T
  • Autorotation Tail Drive Gear: 131T
  • Tail Drive Gear: 34T
  • Drive Gear Ratio: 1:8.42:3.85
  • Weight(With Motor): 2840g

Trex 600E Pro DFC Accessories:

  • T-REX 600E DFC Kits Set x 1set
  • 600 3G Carbon Fiber Blades x 1set
  • 95 Carbon Fiber Tail Blade x 1set
  • 750MX Brushless Motor(530KV) x 1
  • DS615 Digital servo x 3
  • DS655 Digital servo x 1
  • Castle ICE2 HV 80 Brushless ESC x 1

Trex 600E Pro DFC Standard

Trex 600E Pro DFC Standard equipment:

  • Castle ICE2 HV 80 Brushless ESC x 1
  • 750MX Brushless Motor(530KV) x 1
  • DS615 Digital servo x 3
  • DS655 Digital servo x 1

Radio transmitter and electronic equipment required for assembly:

  • 3GX Flybarless System x 1 set
  • Transmitter(7-channel or more, helicopter system)
  • Receiver(7-channel or more)
  • 6S Li-Po 2600 ~ 4600mAh X2 (3300mAh suggestion)
  • Digital Pitch Gauge/Dial Pitch Gauge

Add to Cart:

  • Manufactured by: Align



This product was added to our catalog on Thursday 31 October, 2013.

walitefree