Your cart is empty

Trex 600E Pro DFC Super Combo Align RH60E09XW

$1,188.99

 

 

 

Trex 600E Pro DFC Super Combo Align RH60E09XW

Trex 600E Pro DFC Super Combo, the unbelievable flying performance and control feel of the T-Rex 600E PRO DFC, along with 750MX(530KV) motor, makes this helicopter the creme of crop amongst all competitors!  You may need Align 600E pro DFC .

Trex 600E Pro DFC Super Combo

Trex 600E Pro DFC Super Combo introduction:

  • The brand new T-Rex 600E PRO DFC is the result of ingenious engineering inspired by the art of modern industrial design. Matched with Gpro flybarless system, the new generation T-Rex 600E PRO DFC is a show of perfection..
  • Equipped with the low CG DFC rotor head, effectively reduce wind resistance during flight, providing the most direct and precise control feel back to the pilot; highest spec 2mm thick carbon fiber plate with patented plastic integration techniques not only strengthen the structure, but also create a neat and clean look; Unique battery latch assembly for stronger mount and easier battery replacement.
  • A power upgrade system designed specifically to bump up the power output of T-Rex 600E Pro by 30% by upgrading the motor from 600MX motor (3300w/5500w) to 750MX/530KV motor (4400w/7260w). The feel as if a turbo charger was added to the helicopter, with dramatic increase of motor torque output, and near bulletproof governing speed of the rotor, while maintaining power consistency throughout the entire flight duration. In addition, the brand new spindle shaft design features enlarged diameter from 6mm to 8mm, with oversized M5x10mm spindle screws to increase the rigidity of the overall rotor head.

Trex 600E Pro DFC Super Combo 2

Trex 600E Pro DFC Super Combo Features:

Equipped with Align’s new generation GPro flybarless system, featuring CPU capable of 20 times faster processing power, along with brand new firmware, and performance improving compensation routines; Allowing Gpro to provide faster and more precise response, reaching the pinnacle of helicopter performance. GPro features ergonomically adjustability through PC, as well as iOS and Android smartphone apps. Equipped with the low CG DFC rotor head, effectively reduce wind resistance during flight, providing the most direct and precise control feel back to the pilot, and exhibits exhilarating 3D performance and unimaginable flight speed. The brand new spindle shaft design features enlarged diameter from 6mm to 8mm, with oversized M5x10mm spindle screws to increase the rigidity of the overall rotor head.

Trex 600E Pro DFC Super Combo gpro

Trex 600E Pro DFC Super Combo rotor head

Brand new 600E PRO Performance Booster designed specifically to bump up the power output of T-Rex 600E PRO by 30% by upgrading the motor from 600MX motor (3300w/5500w) to 750MX/530KV motor (4400w/7260w). The feel as if a turbo charger was added to the helicopter, with dramatic increase of motor torque output, and near bulletproof governing speed of the rotor, while maintaining power consistency throughout the entire flight duration. Top mounted motor base and imbedded servo mounts.

Trex 600E Pro DFC Super Combo 3

Trex 600E Pro DFC Super Combo 5

New lightweight H-cross section for electronic equipments. Sliding battery tray rails imbedded into 3K Side frame.

Trex 600E Pro DFC Super Combo 6

Trex 600E Pro DFC Super Combo 6

Trex 600E Pro DFC Super Combo Specification:

  • Length: 1160mm
  • Height: 319mm
  • Width: 210mm
  • Main Blade Length: 600mm
  • Main Rotor Diameter: 1347mm
  • Tail Rotor Diameter: 260mm
  • Motor Pinion Gear: 14T
  • Main Drive Gear: 118T
  • Autorotation Tail Drive Gear: 131T
  • Tail Drive Gear: 34T
  • Drive Gear Ratio: 1:8.42:3.85
  • Weight(With Motor): 2840g
Equipped with new high strength CNC M1/118T helical main gear and tail drive bevel gear assembly, featuring reinforced overall gear structure and increased gear thickness, effectively improves gear's anti torsion ability to prevent gear from deforming under extreme power, reducing gear wear and power loss. CNC machined aluminum pieces including servo mount.

Trex 600E Pro DFC Super Combo 7

Trex 600E Pro DFC Super Combo 8

Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage. Rudder servo mount imbedded into 3K Side frame.

Trex 600E Pro DFC Super Combo 9

Trex 600E Pro DFC Super Combo 9

New tail control assembly with dual mounting points, effectively eliminate slop and improve control precision and feel. Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage.

Trex 600E Pro DFC Super Combo Tail Control

Trex 600E Pro DFC Super Combo 12

Trex 600E Pro DFC Super Combo Standard equipment

  • Gpro Flybarless System X 1 set
  • Castle EDGE HV 80 Brushless ESC x 1
  • 750MX Brushless Motor(530KV) x 1
  • DS615 Digital servo x 3
  • DS655 Digital servo x 1
  • 6A External BEC w/ 5.1V Two-way Step-down

Gpro Programmable Flybarless System Features:

  • Operating voltage range:DC 3.5V~8.4V
  • Operating current consumption: less than 80mA  at 4.8V
  • X and Y axis Operating Angle Range: minus 300~ plus 300 degree
  • Z axis Operating Angle Range: minus600~ plus 600 degree
  • Sensor resolution:12bit
  • Supports 90/120/135/140 CCPM swashplates
  • Spektrum and JR Satellite receivers support (Replaces original factory receiver)
  • Futaba S.BUS/JR X.BUS system support
  • Supports Wide/Narrow Bandwidth Digital and brushless servos
  • Compatible with 2 to 5 blades rotor head
  • Built in governor function
  • Maximum working voltage:8.5V
  • Compatible with 1024/2048 resolution Spektrum receivers
  • Field setup without the use of a PC
  • Support up to 6 servos
  • Automatic servo type recognization
  • Operating Temperature: minus 20~60 degree
  • Operating Humidity:0 %~95%
  • Size:36.5x25.2x15.6 mm Size
  • Weight:11g

 

Gpro Programmable flybarless system

Trex 600E Pro DFC Super Combo package Included:

  • T-REX 600E DFC Kits Set x 1set
  • 600 Carbon Fiber Blades x 1set
  • 95 Carbon Fiber Tail Blade x 1set
  • 750MX Brushless Motor(530KV) x 1
  • DS615 Digital servo x 3
  • DS655 Digital servo x 1
  • Castle EDGE HV 80 Brushless ESC x 1
  • 6A External BEC w/ 5.1V Two-way Step-down
  • Gpro Flybarless System x 1set

Radio transmitter and electronic equipment required for assembly:

  • Transmitter(7-channel or more, helicopter system)
  • Receiver(7-channel or more)
  • 6S Li-Po 2600 ~ 4600mAh X2 (3300mAh suggestion)
  • Digital Pitch Gauge/Dial Pitch Gauge

Add to Cart:

  • Manufactured by: Align



This product was added to our catalog on Wednesday 23 July, 2014.

walitefree