Your cart is empty

Trex 700E F3C V3 Super Combo Align RH70E08XW





Trex 700E F3C V3 Super Combo Align RH70E08XW

Trex 700E F3C V3 heli

Trex 700E F3C V3, the newest Align 700 class Helicopter, it adopts GP900 Head lock gyro. You may need Align 700E Pro DFC Super Combo to take a comparison.

Trex 700E F3C V3 heli 2

GP900 Head lock gyro Features:

  • 1.Utilizes MEMS(Micro Electro Mechanical Systems) micro electronic sensors which are small, highly reliable, and highly stable.
  • 2.16bit high processing speed CPU is used for ultra high resolution, resulting in higher rudder precision than previously possible, even on modern high powered helicopters.
  • 3.Supports Spektrum and JR satellites, traditional receiver not needed.
  • 4.Support Futabs S-BUS system.
  • 5.Support both digital and analog servos.
  • 6.Support both wide and narrow band receivers.
  • 7.Integrated RCE-G600 speed governor function, thus GP900 can provide speed governor function without additional electronics.
  • 8.Suitable for all 200 to 700 size glow engine or electric helicopters, with higher vibration resistance than any other systems. Superior performance is achievable even with harder mounting foam tapes.
  • 9.Support parameter setting through PC interface, as well as firmware updates.
  • 10.Anti-torque compensation. Optimal tail locking achievable no matter if gyro is mounted upright or inverted.       
Focus Shot1(Newly designed main rotor head assembly) Focus Shot2(Innovative sliding battery tray with patented springloaded lacthing mechanism) Focus Shot3(6061-T6 Aluminum alloy material and CNC processed metal battery mount)
Trex 700E F3C V3 rotor head
Trex 700E F3C V3 battery tray
Trex 700E F3C V3 battery mount
Focus Shot4(Utilizes highest spec CNC Modue-1 helical main gear) Focus Shot5(Precision CNC machined aluminum pieces including elevator servo mount) Focus Shot6(Precision CNC machined aluminum pieces including rudderr servo mount)
Trex 700E F3C V3 Main Gear
Trex 700E F3C V3 aluminum pieces
Trex 700E F3C V3 rudderr servo mount
Focus Shot7(New carbon tail control pushrod assembly) Focus Shot8(High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision) Focus Shot9(Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage)
Trex 700E F3C V3 Tail control
Trex 700E F3C V3 rudder control
Trex 700E F3C V3 torque tube drive gear

 Trex 700E F3C V3 Features:    

  • 1.Brand new all metal high precision and high rigidity main blade assembly, providing 3 positive/negative deltas andnumerous Bell & Hiller mixing ratios.
  • 2.Innovative sliding battery tray rails imbedded into the 3K side frames, with patented spring loaded latching mechanism, allowing for quick battery access as well as battery protection.
  • 3.Precision CNC machined aluminum pieces including elevator servo mount, rudder servo mount, rudder control bell crank arm, vertical and horizontal fin mounts.
  • 4.Top mounted motor base allowing blade drafts to cool the motor effectively.
  • 5.Newly designed one piece stainless steel main gear hub to improve rotational stability.
  • 6.Utilizes highest spec CNC modue-1 helical main gear, with highest load tolerance and lowest noise.
  • 7.Motor mount consists of third bearing block to provide motor shaft support, effectively reduce torque induced shifts,and minimize gear striping issue.
  • 8.Top mounted ESC platform to take advantage of main blades airflow for effective cooling.
  • 9.Innovative sliding battery tray rails imbedded into 3K side frame, providing easy battery access and protection.
  • 10.Brand new CNC machined metal tail gear box, with thicker side plates to increase rigidity. The more streamlined design also allows for simpler disassembly.
Focus Shot10(750MX(450KV) high efficiency, high torque brushless motor) Focus Shot11(F3C 700mm carbon main blades) Focus Shot12(DS615 digital servos with CNC aluminum servo horns)
Trex 700E F3C V3 brushless motor
Trex 700E F3C V3 carbon main blades
Trex 700E F3C V3 digital servo
Focus Shot13(DS655 Digital servo) Focus Shot14(GP900 Head Lock Gyro) Focus Shot15(Castle ICE2 HV 120 Brushless ESC)
Trex 700E F3C V3 servo
Trex 700E F3C V3 gp900 head lock gyro
Trex 700E F3C V3 brushless esc
Focus Shot16(6A External BEC w/ 5.1V Two-way Step-down voltage regulator)    
Trex 700E F3C V3 external BEC

Trex 700E F3C V3 Specification:

  • Length: 1343mm
  • Height: 424mm
  • Width: 210mm
  • Main Blade Length: 700mm
  • Main Rotor Diameter: 1582mm
  • Tail Rotor Diameter: 281mm
  • Motor Drive Gear:12T
  • Main Drive Gear:112T
  • Autorotation Tail Drive Gear: 104T
  • Tail Drive Gear: 24T
  • Drive Gear Ratio: 1:9.33:4.33
  • Weight(With Motor): 3230g
  • Flying Weight: Approx. 5200g

GP900 Head Lock Gyro Specification:

  • Operating Voltage:DC 3.5~8.4V
  • Current Consumption: less than 80mA @ 4.8V
  • Angular Detection Speed:600 degrees/sec
  • Operating Humidity: minus 20 degree ~65 degree
  • RoHS certification.
  • Operating Humidity:0%~95%
  • Size:36.5x25.2x15.6mm
  • Weight:11g

Trex 700E F3C V3 heli 2

Trex 700E F3C V3 Accessories:

  • T-REX 700E F3C Kits Set X1
  • Aluminum Tail Boom X1
  • 3K Carbon Fiber Tail Boom X1
  • F3C 700mm Carbon fiber blades X1
  • DS615 Digital servoX3 set
  • DS655 Digital servo X1
  • GP900 Head Lock Gyro X1
  • 750MX Brushless Motor(450KV) X1
  • Castle ICE2 HV 120 Brushless ESC X1
  • 6A External BEC w/ 5.1V Two-way Step-down voltage regulator X1
  • 105mm 3K Carbon Fiber Tail Blades X1 Set

Radio transmitter and electronic equipment required for assembly:

  • Transmitter(7-channel or more, helicopter system)
  • Receiver(7-channel or more)
  • 6S Li-Po 4500 ~ 5200mAh X2
  • Dial Pitch Gauge

Add to Cart:

  • Manufactured by: Align

This product was added to our catalog on Sunday 07 July, 2013.