Your cart is empty

Trex 700N DFC Super Combo Trex RH70N01XW 700 Nitro RC Helicopter

$1,282.99

 

 

 

Trex 700N DFC Super Combo Trex RH70N01XW 700 Nitro RC Helicopter

Trex 700N DFC Review:

Trex 700N DFC will be coming soon. This Trex 700N DFC Trex Helicopter is Equipped with DFC flybarless head assembly, with incredibly low CG design and style to minimize wind level of resistance, offering more direct and precise flight control reaction and higher top speed, the Swashplate direction gyro correction accuracy is significantly improved compared to the previous generation 3G, regardless of the static flight or dynamic flight can feel the excellent performance different from the past.

Trex 700N DFC

Trex 700N DFC Specification(3GX Programmable Flybarless System) :

  • Operating Temperature: minus 10~60 degree
  • X and Y axis Operating Angle Range: minus 300~+300 degree
  • Z axis Operating Angle Range: minus 600~ plus 600 degree
  • Size:36.5x25.2x15.6 mm Size
  • Weight11g Weight
  • Supports Wide/Narrow Bandwidth Digital and brushless servos
  • Spektrum and JR Satellite antennas support (Replaces original factory receiver)
  • Futaba S.BUS system support
  • Built in governor function
  • Maximum working voltage:8.5V
  • Compatible with 1024/2048 resolution Spektrum receivers
  • Supports 90/120/135/140 CCPM swashplates
  • Field setup without the use of a PC
  • Compatible with 2 to 5 blades rotor heads
  • Support up to 6 servos
  • Automatic servo type recognization
Focus Shot1(Equipped with the low CG DFC rotor head, exhibits exhilarating 3D performance and unimaginable flight speed) Focus Shot2(New 700DFC CCPM Metal Swashplate and metal main shaft bearing block.) Focus Shot3(New style H-cross section electronics mounting platform for simplified installation of electronics.)

Trex 700N DFC Rotor Head

Trex 700N DFC Main Shaft

Trex 700N DFC H-cross section

Focus Shot4(Precision CNC machined aluminum pieces including elevator servo mount.) Focus Shot5(Utilizes high spec MOD1 CNC helical main gear and MOD 1 tail drive helical gear.  Operate with the best ratio of 8:1:4.95 to provide best flight performance and tail lock.) Focus Shot6(3K carbon plate narrow frame design, simple yet highly rigid, making assembly and maintenance convenient)

Trex 700N DFC CNC machined mount

Trex 700N DFC 6

Trex 700N DFC 7

Focus Shot7(Utilizes larger capacity fuel tank for larger displacement engines, increasing 3D flight duration) Focus Shot8(Tailboom is extended by 15mm to support the use of 720mm main blades.  When equipped with 105 or 120 class engine, there will be a noticeable increase in power and performance! ) Focus Shot9( New tail control assembly with dual mounting points, effectively eliminate slop and improve control precision and feel.)

Trex 700N DFC engine

Trex 700N DFC Tail Boom

Trex 700N DFC 10

Focus Shot10(Governor Sensor) Focus Shot11(690 3G Carbon fiber blades) Focus Shot12(DS655 Digital Servo)

Trex 700N DFC Sensor

Trex 700N DFC Blades

Trex 700N DFC Servo

Focus Shot13(DS615 Digital Servo) Focus Shot14(3GX Programmable Flybarless System) Focus Shot15(2 In 1 Voltage regulator combo)

Trex 700N DFC DS615 Servo

Trex 700N DFC 3GX system

Trex 700N DFC 12

Trex 700N DFC Heli Features:

  • 3K carbon plate narrow frame design, simple yet highly rigid, making assembly and maintenance convenient.
  • Equipped with DFC flybarless head assembly, with extremely low CG design to minimize wind resistance, providing more direct and precise flight control response and higher top speed.
  • Large diameter clutch assembly with unique installation method; balanced, minimal vibration, and solid power transfer.
  • Front mounted rudder servo to minimize exhaust contamination.
  • New style H-cross section electronics mounting platform for simplified installation of electronics.
  • Utilizes larger capacity fuel tank for larger displacement engines, increasing 3D flight duration.
  • Utilizes high spec MOD1 CNC helical main gear and MOD 1 tail drive helical gear.  Operate with the best ratio of 8:1:4.95 to provide best flight performance and tail lock.
  • Dual bearing plus thrust bearing supported tail grip design.
  • High efficiency tail shaft drive design.
  • High efficiency light weight engine cooling fan, to reduce engine load and improve cooling efficiency.
  • Main fuel tank designed for stable consistent fuel delivery.
  • New one way bearing housing capable of withstanding high torque.
  • quality airbrushed fiberglass canopy with 4 point anti-vibration mount for fast install and removal.
  • New tail control assembly with dual mounting points, effectively eliminate slop and improve control precision and feel.
  • Tailboom is extended by 15mm to support the use of 720mm main blades.  When equipped with91 105 or 120 class engine, there will be a noticeable increase in power and performance!

Trex 700N DFC Heli Specification:

  • Length: 1361mm
  • Height: 385mm
  • Main Blade Length: 690mm
  • Main Rotor Diameter: 1562mm
  • Tail Rotor Diameter: 281mm
  • Engine Pinion Gear: 14T
  • Main Drive Gear: 112T
  • Autorotation Tail Drive Gear: 104T
  • Tail Drive Gear: 21T
  • Drive Gear Ratio: 8:1:4.95
  • Fuel Tank Capacity:660cc.
  • Weight(With Power System): Approx. 4200g

Trex 700N DFC Package Includes:

  • TREX 700 Nitro DFC Kits Set X1
  • 3GX Programmable Flybarless System X1 set
  • Governor Sensor X1 set
  • 690 3G Carbon fiber blades X1
  • 2 In 1 Voltage regulator combo X1 set
  • DS615 Digital servoX3 set
  • DS655 Digital servo X1
  • GP750 Head lock combo X1
  • Aluminum Tail Boom X1

Trex 700N DFC

Radio transmitter and electronic equipment required for Trex 700N DFC assembly:

  • Transmitter(7-channel or more, helicopter system)
  • Receiver(7-channel or more)
  • Standard servo X1 ( for throttle)
  • Engine starter X1
  • Digital pitch gauge X1
  • Fuel pump X1
  • Engine fuel X1
  • 90 Muffler X1
  • Align 91H Engine or 91HP Engine X1

Add to Cart:

  • Manufactured by: Align



This product was added to our catalog on Wednesday 19 September, 2012.

walitefree