Your cart is empty

Trex RH55E07XW Align 550E PRO DFC Combo

$976.99

 

 

 

Trex RH55E07XW Align 550E PRO DFC Combo

Trex RH55E07XW is not included 3GX Programmable Flybarless System and has different size Blades compare to Trex 550E Pro DFC but share the same other features.This Trex RH55E07XW is Brand new T-Rex 550E PRO DFC incorporates all new design elements, focusing specifically on upgrading the power with a 700 class motor, the 730MX (850KV). With a size that fall in-between large and small models, this brand new T-REX 550E PRO DFC features stability and agility, with superior power output that will guaranteed jaw dropping performance.

Trex 550E PRO DFC heli

Trex RH55E07XW Introduction:

  • T-REX 550E PRO DFC is equipped with latest designs such as: DFC main rotor system, new 112T CNC helical main gear, new style tail drive assembly, new style tail control system, etc. The most talked about feature is the newly developed 730MX (850KV) motor, a motor normally found in 700 class helicopter but over spec for 550 class. Enthusiasts can clearly feel the dramatic increase in power and torque, while taking advantage of its higher efficiency, lower current and temperature benefits. In addition, the newly designed 2mm thick 3K carbon side plates not only enables the installation of wider 730MX (850kv) motor, they also simplify the structure, while maintaining high rigidity and easy maintenance.
  • The clean atheistic exterior, ergonomic design, and superior control feel; all are reasons for enthusiasts not to miss this value packed T-REX 550E PRO DFC!

Trex RH55E07XW dimension

 

Equipped with the low CG DFC rotor head, exhibits exhilarating 3D performance and unimaginable flight speed. New DFC CCPM Swashplate and new metal body mount to increase body rigidity and added gyro placement location.
Trex RH55E07XW rotor head Trex RH55E07XW swashplate
New 2mm 3K carbon fiber side frame for simple yet rigid frame construction, not only for easy assembly and maintenance, but also allowing capable of 730MX(850KV) motor to increase fight power. Integrated swash anti-rotation guide and gyro mounting platform.
Trex RH55E07XW side frame Trex RH55E07XW anti rotatin guide
Equipped with new high strength cnc m1 helical main gear and tail drive bevel gear assembly, featuring reinforced overall gear structure and increased gear thickness, effectively improves gear's anti torsion ability to prevent gear from deforming under extreme power, reducing gear wear and power loss. Power upgrade to 730MX(850KV) motor, the feel as If a turbo charger was added to the helicopter, capable of high efficiency, low current and low temperature, with dramatic 700 class flight performance in 550 class helicopter.
Trex RH55E07XW helical main gear Trex RH55E07XW 730mx motor

Trex RH55E07XW Specification:

  • Length: 1160mm
  • Height: 330mm
  • Width: 110mm
  • Main Blade Lenght: 520mm
  • Main Rotor Diameter: 1188mm
  • Tail Rotor Diameter: 254mm
  • Motor Drive Gear: 16T
  • Main Drive Gear: 112T
  • Autorotation Tail Drive Gear: 131T
  • Tail Drive Gear: 34T
  • Drive Gear Ratio: 1:7:3.85
  • Weight(w/o power system): 2400g

Standard Equipment:

  • Castle Talon 90 Brushless ESC * 1
  • 730MX Brushless Motor (850KV) * 1
  • DS615 Digital Servo * 3
  • DS655 Digital Servo * 1

Trex RH55E07XW standard equipment

Trex RH55E07XW Accessories:

  • T-REX 550E PRO DFC Kits Set x 1 set
  • 520 3G Carbon Fiber Blades x 1 set
  • 90mm Carbon Fiber Tail Blade x 1 set
  • 730MX Brushless Motor(850KV) x 1
  • DS615 Digital servo x 3
  • DS655 Digital servo x 1
  • Castle Talon 90 Brushless ESC x 1
Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage. Rear mounted rudder servo mount & carbon fiber gyro mount.
Trex RH55E07XW torque tube drive gear Trex RH55E07XW rudder servo mount
Equipped T-REX 600 class tail boom set, supporting with 600mm main blade and increase tail stability. Brand new tail blade designed to sustain optimal tail locking performance under high head speed and extreme flight conditions.
Trex RH55E07XW tail boom Trex RH55E07XW tail blade
High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.  
Trex RH55E07XW new tail gearbox  

Radio transmitter and electronic equipment required for assembly:

  • 1.Transmitter(6-channel or more,helicopter system)
  • 2.Receiver(6-channel or more)
  • 3.Pitch gauge or Digital Pitch Gauge
  • 4.6S Li-Po 1100~1400mAh battery x 1 5.3GX Flybarless System x 1 set

Add to Cart:

  • Manufactured by: Align



This product was added to our catalog on Sunday 08 September, 2013.

walitefree