HACKER SAFE certified sites prevent over 99.9% of hacker crime.
Your cart is empty

WL Radio Adapter WL-T6 2.4Ghz Module for Walkera JR Futaba Radio

$22.99

 

 

 

WL Radio Adapter WL-T6 2.4Ghz Module for Walkera, JR, Futaba Radio

WL Radio Adapter WL-T6

WL Radio Adapter WL-T6, the newest Radio Adapter from WL which can choose different ways of power supply :intarnal power supply and external power supply. WL Radio Adapter WL-T6 is perfectly compatible with different brands of RC transmitter,such as JR, FUTABA,Walkera,etc.It also has sealed rechargeable protection and low-voltage alarm function. You may need other brand Radio.

WL Radio Adapter WL-T6 for JR transmitter

WL Radio Adapter WL-T6 for Walkera transmitter

WL Radio Adapter WL-T6 Features:

  • Use your own transmitter to remote control helicopter from WLToys
  • Internal power supply, suitable for different brand of radio
  • Support main stream radio, such as CopterX / JR / FUTABA / WALKERA
  • Charging protection and low voltage alarm function 
WL Radio Adapter WL-T6 for Futaba transmitter
WL Radio Adapter WL-T6 Specification:
  • Sealed battery: 3.7V 120mAh Li-Po
  • Operating voltage: 5 - 12V DC
  • Operating current: less or equal to 100mA
  • Operating frequency: 2402MHz - 2477MHz
  • Spread spectrum mode: FHSS
  • Number of frequency channels 20
  • Hopping rate: 240 jump/s
  • Weight: 30.8g
  • Dimension: 136*60*17mm 
WL Radio Adapter WL-T6 for Futaba transmitter
WL Radio Adapter WL-T6 for Futaba transmitter
 
WL Radio Adapter WL-T6 Connection:
  • For WL-T6 to get power supply from transmitter with DC charging port (eg: CopterX / JR / WALKERA), switch the WL-T6 internal power supply to OFF state (right side), properly connect the signal cable to the DSC port and power cable to the DC port.
  • For WL-T6 to get power supply from transmitter without DC charging port (eg: FUTABA), switch the WL-T6 internal power supply to OFF state (right side), properly connect the signal cable the simulator interface.
  • For WL-T6 supply its own power (eg: other brands of transmitter without DC charging port), switch the WL-T6 internal power supply to ON state (left side), properly connect the signal cable to the DSC port. 
WL Radio Adapter WL-T6 2
WL Radio Adapter WL-T6 Operation:
  • Under normal circumstances the signal indicator light is GREEN. If it is in RED, please check if the transmitter modulation mode is in PPM format. Set the types of transmitter you are using through the Mode Selector Button, the color of Mode Indicator Light shows as follow: FUTABA (green) / JR (red) / WALKERA, CopterX (no light). 

WL Radio Adapter WL-T6 5

 
WL Radio Adapter WL-T6Charging:
  • Switch the WL-T6 internal power supply to OFF state (right side)
  • Connect the USB charging wire to a computer USB port or other USB power supply port
  • Signal Indicator Light will start to flash and the Mode Indicator Light will show the charging status as follow: charging (red) / charging is over (green) 
WL Radio Adapter WL-T6 7
WL Radio Adapter WL-T6 Package Included:
  • WL-T6 radio adapter module
  • 3M double-sided tape
  • Signal cable for FUTABA
  • Signal cable for JR, WALKERA and other
  • USB charging wire
  • Instruction manual 
WL Radio Adapter WL-T6 9

Add to Cart:

  • Manufactured by: WL



This product was added to our catalog on Wednesday 10 July, 2013.

walitefree
HACKER SAFE certified sites prevent over 99.9% of hacker crime.